Chains for Forklift

Forklift Chain - The life of the forklift lift chains could be lengthened with correct maintenance and care. Lubricating correctly is an excellent method in order to extend the capability of this particular forklift component. It is really essential to apply oil periodically with a brush or whatever lube application device. The frequency and volume of oil application must be sufficient to be able to avoid any rust discoloration of oil within the joints. This reddish brown discoloration generally signals that the lift chains have not been correctly lubricated. If this condition has happened, it is extremely imperative to lubricate the lift chains immediately.

It is normal for some metal to metal contact to happen during lift chain operation. This could result in components to wear out in time. The industry standard considers a lift chain to be worn out when 3% elongation has occurred. So as to avoid the scary likelihood of a catastrophic lift chain failure from taking place, the manufacturer greatly recommends that the lift chain be replaced before it reaches 3% elongation. The lift chain lengthens because of progressive joint wear which elongates the chain pitch. This elongation can be measured by placing a certain number of pitches under tension.

Another factor to ensuring correct lift chain maintenance is to check the clevis pins on the lift chain for indications of wear and tear. The lift chains have been assembled so that the tapered faces of the clevis pin are lined up. Generally, rotation of the clevis pins is often caused by shock loading. Shock loading takes place if the chain is loose and then suddenly a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. With no correct lubrication, in this particular situation, the pins can rotate in the chain's link. If this particular situation happens, the lift chains need to be replaced right away. It is essential to always replace the lift chains in pairs to be able to ensure even wear.


Click to Download the pdf

Forklift Parts

Attachments for LPG Forklifts

LPG Forklift Attachments - Liquefied petroleum is utilized as a fuel in heating appliances and vehicles. It is a very combustible combination of hydrocarbon gases, more and more utilized as a refrigerant and an aerosol propellant. Liquefied petroleum gas or otherwise known as LPG, is replacing chlorofluorocarbons in an effort to be able to decrease ozone layer damage. LPG is...

More

---

Fuel Systems for Forklifts

Forklift Fuel System - The fuel system is responsible for supplying your engine the diesel or gasoline it requires to be able to run. If whatever of the separate components in the fuel system break down, your engine would not function right. There are the major components of the fuel system listed beneath: Fuel Tank: The fuel tank is a...

More

---

Articulated Boom Lift Attachment

Articulated Boom Lift Attachment - Boom vehicle are often utilized by phone, cable television and utilities companies as they have long folded arms which are commonly folded over the roofs of business vehicles. On the end of the extension of extendable arms usually sits a bucket-like apparatus. When a container vehicle has an extendable boom installed on the roof this...

More

---

Platform Scissor Lift Attachment

Platform Scissor Lift Attachments - Scissor lift pallet vehicles are created to have the ability to rearrange and stack pallets with a built-in raising apparatus that permits the pallets to be elevated. This equipment is really effective for working in limited spaces that will not tolerate a full-sized lift truck. The scissor pallet vehicle is very proficient at loading and...

More

---

Doosan Forklift Parts

Doosan Forklift Parts - Doosan Infracore Company Ltd. is an intercontinental company consisting of Diesel Engines, Defense Industry products, Industrial Vehicles, Construction Technologies and Machine Tools and Automation Systems. Their United States affiliate, Doosan Infracore America Corporation, situated in Suwanee, Georgia houses a 170,000 square foot manufacturing facility, home to a Compact Equipment and Construction division. Cleveland, Ohio houses the...

More

---

Parts for Reach Stackers

Reach Stacker Parts - Lift trucks are utilized in practically all industrial construction sites and in warehouse operations and in boat yards. The reach feature of a lift truck is a vital part used in a variety of applications like for example when a shelving system is being used to stack pallets. A forklift operator will use the equipment's reach...

More

---

Attachment for Gas Forklift

Gas Forklift Attachments - Liquefied petroleum is utilized as a fuel in heating vehicles and appliances. It is a very flammable combination of hydrocarbon gases, increasingly utilized as a refrigerant and an aerosol propellant. Liquefied petroleum gas or also referred to as LPG, is replacing chlorofluorocarbons in an effort to be able to reduce ozone layer damage. LPG is usually...

More

---

Part for Boom Lift

Boom Lift Parts - Boom Lifts are a platform lift piece of equipment that could be raised or lowered to varying heights, making this apparatus a nifty tool for many industrial applications. There are many unique kinds of Boom Lift consisting of knuckle booms, scissor platform lifts, and aerial platform lifts, each functioning differently. The regular aerial lift variation is...

More

---